1. Custom made lampshades
5. Choose lampshade Dimensions.

*We recommend at least 3-5 cm the difference between the upper and lower diameter for a lampshade with a correction of the perspective.

  • Small diameter of the lampshade.
  • Large diameter of lampshade.
  • The height is measured on the inside of the lampshade perpendicular to the plane of the lower ring.
  • This height must be enough to hide the soket. (If desired)
- +
  • 50pcs - 5% discount, 100pcs - 7% discount, 200pcs - 10% discount

Sizing rules

  • The height of the lampshade is recommended to be maximum 3/4 of the height of the lamp leg but in accordance with the diameter of the lamp.
  • The diameter of the base must be higher in diameter than the maximum diameter of the lamp.
  • The diameter of the lampshade must be maximum equal to the height of the foot from the base to the socket.
  • Reading lamps must have the diameter of the more eluted base to disperses more light.
  • LED bulbs are recommended because it does not emanate much heat.
  • The upper mouth of the lampshade must be large enough to ventilate the.
  • Leave 5-7 cm free around the bulb, so as not to damage the lampshade material (from the bulb to the lampshade material.)

Attention to the lampshades that are small to the mouth, as they can melt or even take fire.

Lampshade sewn by hand made of fabric stretched or folded. The material inside is a durable polyester that disperses the light.

From the beginning

Chosen material: 1601 60 Coton 40% Poliester

Choose another material

Fastening to the upper part on the socket

  • Large soket with ring E27
  • Diameter of the hole: 40 mm
  • Fastening type nr. 6

Diferent fastening system