1. Custom made lampshades
5. Choose lampshade Dimensions.
  • Small lampshade size.
  • Large diameter of lampshade.
  • The height is measured on the inside of the lampshade perpendicular to the plane of the lower ring.
  • This height must be enough to hide the soket. (If desired)
- +
  • 50pcs - 5% discount, 100pcs - 7% discount, 200pcs - 10% discount

Sizing rules

  • The height of the lampshade is recommended to be maximum 3/4 of the height of the lamp leg but in accordance with the diameter of the lamp.
  • The diameter of the base must be higher in diameter than the maximum diameter of the lamp.
  • The diameter of the lampshade must be maximum equal to the height of the foot from the base to the socket.
  • Reading lamps must have the diameter of the more eluted base to disperses more light.
  • LED bulbs are recommended because it does not emanate much heat.
  • The upper mouth of the lampshade must be large enough to ventilate the.
  • Leave 5-7 cm free around the bulb, so as not to damage the lampshade material (from the bulb to the lampshade material.)

Attention to the lampshades that are small to the mouth, as they can melt or even take fire.

The uni or printed textile material is laminated on a PVC medium specially designed for lampshades.

From the beginning

Chosen material: V21 Grena

Choose another material

Fastening to the upper part on the shaft.

  • Diameter of the hole 10 mm
  • Fastening type nr. 5

Diferent fastening system